Firmware Selector

Firmware Selector

Version information below

---

Select a Release:

Latest Release Loading...

Select a Release:

Older Releases may not be fully compatible with the Selector

Select a month to load releases

Selected Release Tag:

latest

Broaden Search Results?

Yes No

Model:

--Select Model-- Aquila Aquila X3/S3 Aquila C2 HC32 Ender-3 V2/S1

ProUI Extra Features:

Yes No

LCD Display:

--Select-- DWIN TJC 12864 Monochrome

Board Type:

--Select-- GD32 N32 HC32 Creality 4.2.7 Creality 4.2.2 Ender-3 S1 F103 Ender-3 S1 F401 Creality E3 Free-runs BTT SKR Mini E3

Features:

--Select-- CR/3D/BL-Touch Only BIQU MicroProbe V2 Induction Probe Creality Sprite Creality Spider Speedy

Secondary Features:

--Select-- BIQU MicroProbe V2 Induction Probe Creality Sprite Creality Spider Speedy

Leveling:

--Select-- Unified Bed Leveling Bilinear Bed Leveling Manual Mesh Default

Options:

--Select-- MPC Input Shaping Power-loss Recovery

Secondary Options:

--Select-- MPC Input Shaping Power-loss Recovery

Depreciated!

Power-loss Recovery option for this firmware is deprecated.
It is only here for older releases.
Most recent ones now have this enabled.

---

 Candidates:

---

🖥️ Display Assets

---

• TJC Screen Assets
  📲Click to Download tjc_update.zip
  (for TJC screen update if you haven't already)
  
  
• Aquila LCD Display Assets 🗂️
  
  
  
• Creality LCD Display Assets
  

  🗂️Click to Download DWIN_SET (for DWIN screen units)
  📲Click to Download private (for DACAI screen units)

  
  
• Giadej LCD Display Assets
  

  🗂️Click to Download DWIN_SET (for DWIN screen units)
  📲Click to Download private (for DACAI screen units)

📚 Versions

---

Most versions now include options like POWER_LOSS_RECOVERY, even if it's not listed in the filename.
This remains selectable for older firmware only.
Board types 422/427 and leveling options Default/Manual Mesh should have additional features enabled, which may not be available in base UBL/BLT ProUI-EX versions due to memory space limitations.

There are no significant differences in firmware compatibility between models. For example, a Creality 4.2.7 board for an Aquila will work on an Ender-3 V2/S1.
The differences are mainly in color schemes and naming — whether it's a Creality Ender or Voxelab Aquila.

Boards like Creality E3 Free-runs and Ender-3 S1 F103 / Ender-3 S1 F401 are currently only selectable under the Ender-3 V2/S1 model.
The BTT SKR Mini E3 is available under both models and will work in either case.

If you are using a 12864 Monochrome Display, it is only listed under Model C2.
This is because the Voxelab Aquila C2 exclusively uses only this type of LCD.
While the firmware can be used on an Ender-3/Pro, it is recommended to use official or alternative firmware.

Here are the current configurations offered:

Bed Leveling Options

• [ _Default-NP ]: Use if you have a near stock machine
  ^{Default No Probe}
• [ _MM ]: Create a bed mesh without an auto bed probe
  ^{Manual Mesh Bed Leveling}
• [ _BLT ]: Use if you have a CR/3D/BL-Touch level sensor installed.
  ^{Bilinear Auto Bed Leveling}
• [ _UBL ]: Similar to both MM and BLT - with more options. Recommended over BLT
  ^{Unified Bed Leveling}

Special Versions

^{(List of file prefixes and suffixes)}

ProUI Extra Features
[ -ProUI-EX ]
| Toolbar, change bed physical dimensions | (Change other special features and options without having to reflash)
Creality Ender-3 V2/S1 Only Options
[ _E3-Free-runs ]
| Creality E3 Free-runs | (Creality board - TMC2209 drivers)
[ -S1-<F1/F4> ]
| Creality Ender-3 S1 | (Check to see whether you have F1 or F4)
-S1-F1:  STM32F103RC chip and CREALITY_V24S1_301 board
-S1-F4:  STM32F401RC chip and CREALITY_V24S1_301F4 board
BTT SKR Mini E3 Options
[ _SKR-Mini-E3- ]
| BTT SKR Mini E3 | (V2.0, V3.0, V3.0.1)
V2:  STM32F103RC chip
V3:  STM32G0B1RE chip
V3_0_1:  STM32F401RC chip
LCD Displays
[ DWIN ]
| Stock DWIN LCD | (No actual prefix)
[ TJC- ]
| Creality TJC LCD | (As aftermarket or sometimes used in stock Creality machines)
[ C2_ ]
| Monochrome 128x64 LCD | (Model: C2 only! Used in Aquila C2 and original Ender-3/CR-10)
^{This has NO ProUI capabilities}
Features
[ _SPRT13 ]
| Sprite Extruder | (Uses thermistor # 13)
[ _SPDY5 ]
| Spider Speedy Hotend | (Uses thermistor # 5)
[ _IND ]
| Inductive Sensor | (Probe used on X3/S3 models)
CAUTION: You may need to adjust the Probe Y Offset to -20 or -25 on an S3
[ _BMP ]
| BIQU MicroProbe V2.0 | (Alternative to CR/3D/BL/-Touch) ^{Use ONLY this firmware with _BMP if you DO have this probe}
Options
[ -IS ]
| Input Shaping | (Similar to Linear Advance) ^{Use ONLY if you mean to do the initial calibration✶}
[ -MPC ]
| MPC Autotune | (Replaces PID for hotend)
[ -PLR ]
| Power-Loss Recovery | (Resumes where a print job left off when there is a power outage)

^{✶Reminder: Do not use `Input Shaping` (file suffix -IS) unless you do the necessary calibration.
Prints will be effected regardless. May require a special breakout board or test prints to calibrate.}